Skip to main content
Sunbelt Stud Welding
1-800-462-9353
www.sunbeltstudwelding.com

Wire Tie Down - CD Weld Stud

Wire Tie Down CD Weld Stud
Wire Tie Down CD Weld Stud

CD Wire Tie Down Stud - Application and Installation Video

The CD Wire Tie Down Stud is designed specifically for quick and rugged wire security. Wire bundles up to 1 inch in diameter can be neatly welded into place within milliseconds, providing a permanent worry-free wire maintenance system.

The Wire Tie Down Stud is an aesthetic and reliable alternative to traditional screw or adhesive fasteners.

Because the Wire Tie Down Studs are Stud Welded into place, eliminating the need for drilling holes or glue, they provide a secure installation that will not break, loosen or weaken over time, with a pull off that exceeds the capability of a typical 3/16 inch nylon cable tie.

Wire Tie Down Studs are ideally suited for any wire assembly, from heavy duty construction equipment to wire management in industrial control boxes and telephone junction boxes.

The stud is a Capacitor Discharge, CD Weld Stud, and is installed with traditional CD Stud Welding equipment. The stud is equivalent to a U.S. number 10 fastener. The Wire Tie Stud is compatible with any CD welder capable of welding a number 10 stainless steel or aluminum fastener.

For a quote or to order, please specify:
Product Code:Material:
CTBSpecify
STUD
MATERIALALUMINUMSTAINLESS STEEL
Grade - 5000 SeriesAISI grade
302 HQ
MECHANICAL PROPERTIESTensile - 45,000 psi (min.)Tensile - 85,000 psi (min.)
Yield - 40,000 psi (min.)
Yield - 25,000 psi (min.)
SIZEEquivalent to U.S. #10Equivalent to U.S. #10
SADDLE
MATERIALNylon 6/6
NYLON 6/6 PROPERTIES
PROPERTYASTM
METHOD
TEST
CONDITION
UNITSNYLON 6/6
Tensile StrengthD638+73°F; 50% RHkpsi11.2
Elongation at BreakD638+73°F; 50% RH%>=300
Yield StrengthD639+73°F; 50% RHkpsi8.5
Shear StrengthD732Dry as Molded (DAM)kpsi9.6
Deformation Under LoadD6212,000 psi; +122°F; DAM%1.4
IZOD ImpactD256+73°F; 50% RHft lb/in2.1
Tensile Impact StrengthD1822+73°F; Long Specimen; DAMft lb/in240
Melting PointD789Fisher-Johns°F491
Thermal Linear ExpansionD696DAMin/in/°FTBD
Thermal Conductivity--DAM Conche-FitchBTU-in/h/ft/°F1.7
Brittleness TemperatureD74650% RH°F-85
Oxygen IndexD2863DAM%028
Oxygen IndexD286450% RH%031
UL FlammabilityUL 94DAM--V-2
UL FlammabilityUL 9550% RH--V-2
NYLON 6/6 NBS SMOKE GENERATION
SAMPLE THICKNESSUL FLAMMABILITYENERGY SOURCESPECIFIC OPTICAL DENSITY
AT MAXIMUM SMOKE ACCUMULATIONAT 2 MINUTES
1/16"94 V-2Radiant
(2.5 watts/sq.cm)
130
1/8"94 V-2Radiant Plus
Flaming Gas Jets
261
NYLON 6/6 TEMPERATURE INDEX
MINIMUM THICKNESSTEMPERATURE INDEXHOT WIRE (sec)
ELECTRICAL (°C)MECHANICAL W/O IMPACT (°C)
0.0281256511.8
0.0581258515.0
NYLON WIRE TIE CD STUD - MECHANICAL DIMENSIONS
 INCHMM
HEIGHT0.3909.90
LENGTH0.87522.22
WIDTH0.62515.87
SLOT HEIGHT0.0902.29
SLOT WIDTH0.3258.26

Wire Tie Down Stud Dimensions

Wire Tie Down Stud Dimensions

WIRE TIE CD STUD - MECHANICAL DIMENSIONS IN INCHES

CHEMISTRY (%)
C0.017
S0.001
Cr17.5
Mo0.05
Mn0.83
Si0.32
Ni9.54
Cu3.07
P0.024
CoTrace
NPPM 155
FeRemainder

Wire Tie Down Stud holding cables in Utility Box

Wire Tie Down Stud used for holding cables