NTJ studs are commonly used for lifting parts and for assembly attachment.
To stud weld NTJ studs, special chucks are required and the dual leg ferrule foot plate is preferred.
| For a quote or to order, please specify: | ||||||
|---|---|---|---|---|---|---|
| Product Code: | Base Diameter: | Minimum Length: |
Minimum Bend Length: |
Minimum Inside Diameter: | Material: | Quantity: |
| NTJ | Specify D | Specify L | Specify E | Specify ID | Specify | Specify |
| Stud Specifications | Standard Accessories | |||||||
|---|---|---|---|---|---|---|---|---|
| Base Diameter | Minimum Length | Minimum Bend Length | Minimum Inside Diameter | Minimum End Length | Ferrule | Foot | Grip | Chuck |
| D | L | E | ID | G | Part Number | P/N | P/N | P/N |
| 0.188 | 1.125 | 1.000 | 0.500 | 0.500 | F019-F | QN-018 | n/a | JB-018 |
| 0.250 | 1.250 | 1.125 | 0.625 | 0.500 | F025-F | QN-025 | n/a | JB-025 |
| 0.312 | 1.500 | 1.250 | 0.750 | 0.500 | F031-F | QN-031 | n/a | JB-031 |
| 0.375 | 1.625 | 1.375 | 0.875 | 0.500 | F037-F | QN-037 | n/a | JB-037 |
| 0.438 | 1.750 | 1.500 | 1.000 | 0.500 | F043-F | QN-043 | n/a | JB-043 |
| 0.500 | 2.000 | 1.500 | 1.000 | 0.500 | F050-F | QN-050 | n/a | JB-050 |
| 0.625 | 2.500 | 1.875 | 1.500 | 0.500 | F050-F | QN-050 | n/a | JB-062 |
| MATERIAL | MILD STEEL | STAINLESS STEEL | |
|---|---|---|---|
| C - 0.23% max. | P - 0.04% max. | AISI grade - 302/304/305/316 std. | |
| Mn - 0.90% max. | S - 0.05% max. | Other grades available upon request. | |
| MECHANICAL PROPERTIES | Tensile | 60,000 psi (min.) | Values for various grades available upon request. |
| Yield | 50,000 psi (min.) | ||
| Elongation | 20% (in 2 inches) | ||
| PLATING | Plating is not standard. Cadmium, Copper, Nickel, and Zinc available upon customer request. | Does not apply to Stainless. | |
