TC studs are used to provide a spacer between the base metal and the attached part.
| For a quote or to order, please specify: | ||||||
|---|---|---|---|---|---|---|
| Product Code: | Base Diameter: | Base Length: | Thread Diameter: | Thread Length: | Material: | Quantity: |
| TC | Specify D | Specify L | Specify C | Specify A | Specify | Specify |
| STUD | ||||||
|---|---|---|---|---|---|---|
| Base Diameter | Min. Base Length | Max. Thread Diameter | Std. Thread Length | Collar Diameter | Collar Thickness | Ferrule Code |
| D | L | C | A | E | F | |
| 1/4 | .375 | .215 | .500 | .500 | .093 | C250 |
| 5/16 | .375 | .275 | .500 | .562 | .093 | C312 |
| 3/8 | .500 | .330 | .500 | .625 | .109 | C375 |
| 1/2 | .625 | .448 | .593 | .750 | .140 | C500 |
| THREADS: Standard thread is UNC-2A (Rolled when possible),other threads are available upon request. | ||||||
| MATERIAL | MILD STEEL | STAINLESS STEEL | |
|---|---|---|---|
| C - 0.23% max. | P - 0.04% max. | AISI grade - 302/304/305/316 std. | |
| Mn - 0.90% max. | S - 0.05% max. | Other grades available upon request. | |
| MECHANICAL PROPERTIES | Tensile | 60,000 psi (min.) | Values for various grades available upon request. |
| Yield | 50,000 psi (min.) | ||
| Elongation | 20% (in 2 inches) | ||
| PLATING | Plating is not standard. Cadmium, Copper, Nickel, and Zinc available upon customer request. | Does not apply to Stainless. | |
