Skip to main content
1-800-462-9353
Stud Welding Equipment and Supplies Request a quote
1-800-462-9353
Sunbelt Stud Welding
1-800-462-9353
www.sunbeltstudwelding.com
Download PDF Download PDF
Request a QuoteRequest a Quote

Full Thread - Arc Weld Stud

For a quote or to order, please specify:
Product Code: Diameter: Length: Material:
FT Specify D Specify L Specify
Fully Threaded Arc Weld Stud
Full Thread

TF weld studs are available in mild steel and stainless steel materials.

Coarse and fine threads are available in both imperial (UNC-2A and UNF-2A) and ISO Metric (Class 6g) sizes. The imperial coarse threads are depicted below (UNC-2A) and are standard.

TF studs permit close run down of a nut to the base metal.

STUD SPECIFICATIONS
THREAD SIZE MINIMUM LENGTH BASE DIAMETER FLASH DIMENSIONS FERRULE
C L D E F PART NUMBER
10-24 0.750 0.159 0.281 0.094 F019-F
10-32 0.750 0.167 0.281 0.094 F019-F
1/4-20 0.750 0.215 0.359 0.109 F025-F
5/16-18 0.750 0.275 0.438 0.109 F031-F
3/8-16 0.750 0.330 0.500 0.125 F037-F
7/16-14 0.875 0.387 0.578 0.141 F043-F
1/2-13 0.875 0.444 0.688 0.156 F050-F
5/8-11 1.000 0.562 0.797 0.188 F062-F
3/4-10 1.250 0.680 0.938 0.250 F075-F
7/8-9 1.375 0.798 1.094 0.313 F087-F
1-8 1.500 0.915 1.234 0.375 F100-F
Standard thread is UNC-2A (Rolled when possible). Other threads are available upon request. Maximum standard thread length is 3-7/8".
Metric sizes are available
MATERIAL MILD STEEL STAINLESS STEEL
C - 0.23% max. P - 0.04% max. AISI grade - 302/304/305/316 std.
Mn - 0.90% max. S - 0.05% max. Other grades available upon request.
MECHANICAL PROPERTIES Tensile 60,000 psi (min.) Values for various grades available upon request.
Yield 50,000 psi (min.)
Elongation 20% (in 2 inches)
PLATING Plating is not standard. Cadmium, Copper, Nickel, and Zinc available upon customer request. Does not apply to Stainless.